How I set up Tinyproxy as a forward proxy and reverse proxy

In this post, I will show how I set up Tinyproxy as a forward proxy and a reverse proxy.

Tinyproxy is a light-weight HTTP/HTTPS proxy daemon for POSIX operating systems, which is open source on Github.

I tried out this tool to set up a forward proxy on the client side of the communication and a reverse proxy on the server side. I wanted to use this so that I could do experiments on the network between the forward proxy and reverse proxy, without the client and server’s involvement.

Reverse proxies are mostly used as a load balancer, where we connect with a reverse proxy which then decides to which machine it should send the request.

“(…) With reverse proxying it’s possible to make a number of sites appear as if they were part of a single site (…)”

from the manual of the configuration file of Tinyproxy.

Requirements

The following requirements represent what I used in my experiment:

  • An image with a Linux OS distribution — I used a Debian GNU/Linux 8.9 (Jessie);
  • 4 virtual machines to serve as client, forward proxy, reverse proxy and server — I used VirtualBox to run these machines, with the Debian’s OS image;
  • The server has to run a Web Server — I used Apache HTTP server, to return the default HTML page saying “It works!”;
  • The client has to have a browser or a command-line tool installed such as curl, to do HTTP requests;
  • The forward and reverse proxy machines should have tinyproxy installed — Next I’ll show how to install it on the Debian machines. The version I used was 1.8.3.

Test architecture

Test architecture for the experiment

I created isabelcosta/testing-tiny-proxy repository on Github with the configuration files needed to run both roles of forward proxy and reverse proxy.

Network Configuration

VirtualBox lets you configure the network settings of the virtual machines. I used Nat Network setting which allowed me to have all the machines within the same network. These were the IP assigned to each machine.

  • Client — 10.0.2.33
  • Forward Proxy — 10.0.2.35
  • Reverse Proxy — 10.0.2.36
  • Server — 10.0.2.34

These IP addresses will be important, because they will appear in the examples of how to test the system.

Install Tinyproxy

To install Tinyproxy, you have to type the following command into the forward and reverse proxy machines’s terminal:

apt-get install tinyproxy

Setting up the system

Tinyproxy works according to configuration files. I wrote two configurations, one for the forward proxy and another for the reverse proxy.

Forward and Reverse proxy configuration files:

To run tinyproxy with a specific configuration just do the following:

tinyproxy -c <configuration-file>

E.g.: tinyproxy -c forwardproxy.conf

Testing the system

First make sure that the server is running accordingly and you can access the server with the following command, from any of the machines, since all of them are in the same network. You can test this using curl command line tool or on a browser:

curl http://10.0.2.34:80/ 

Now to test the whole system, if you want to use curl you can type this on the client machine console:

curl -v --proxy http://10.0.2.35:8888 http://10.0.2.36:8888/

This is the output of the previous command:

root@debian:/home/debian# curl -v --proxy http://10.0.2.35:8888 http://10.0.2.36:8888
* Rebuilt URL to: http://10.0.2.36:8888/
* Hostname was NOT found in DNS cache
* Trying 10.0.2.35...
* Connected to 10.0.2.35 (10.0.2.35) port 8888 (#0)
> GET http://10.0.2.36:8888/ HTTP/1.1
> User-Agent: curl/7.38.0
> Host: 10.0.2.36:8888
> Accept: */*
> Proxy-Connection: Keep-Alive
>
< HTTP/1.1 200 OK
< Via: 1.0 tinyproxy2 (tinyproxy/1.8.3), 1.1 tinyproxy1 (tinyproxy/1.8.3)
< Last-Modified: Mon, 11 Jun 2007 18:53:14 GMT
< Date: Tue, 12 Dec 2017 23:01:37 GMT
< Content-Type: text/html
< ETag: "2d-432a5e4a73a80"
< Set-Cookie: yummy_magical_cookie=/; path=/
* Server Apache/2.4.29 (Unix) is not blacklisted
< Server: Apache/2.4.29 (Unix)
< Content-Length: 45
< Accept-Ranges: bytes
<
<html><body><h1>It works!</h1></body></html>
* Connection #0 to host 10.0.2.35 left intact

Another way to see that this is working, is by using Wireshark tool. This tool allows you to see network traffic. Before testing the system start running Wireshark. By testing in a local network you can see the whole traffic from the client to the server. After requesting and receiving the response from the server, if you filter the Wireshark captures by “http”, you should see a result similar to the following image.

Wireshark capture of the communication between the client and the server, passing through the proxies.

In this capture you can see the traffic in both directions: client ↔ forward proxy ↔ reverse proxy ↔ server.

To check log file and the forward and reverse proxies, you can type the following on either the machines:

cat /var/log/tinyproxy/tinyproxy.log

If you want to test this in another way you can change the proxies’ configuration files on isabelcosta/testing-tiny-proxy repository.

Tips & Notes

  • If you want to set up other paths you can do it with the “ReversePath” keyword. E.g.: ReversePath “/test” “http://10.0.2.34:80/” — in this way you can access the server by typing “http://10.0.2.36:8888/test”
  • I was always getting the error 400 Bad Request, because I was using this tool in the wrong way. I was using curl to connect with the server as the endpoint instead of the reverse proxy. The reverse proxy does not work as a forward proxy, so don’t use the “upstream” keyword to forward the traffic to the reverse proxy.

Hope this helps you in your learning journey!

You can find me on Twitter, LinkedIn, GitHub and my personal website.

--

--

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Isabel Costa

Isabel Costa

656 Followers

Software Engineer from Portugal working in the UK • GitHub Star • Open Source advocate • https://isabelcosta.github.io